Rockwell Automation 1784-PCD DeviceNet Communication Card - Manual (Page 99)

Publication 1784-IN029C-EN-P - June 2001
Appendix
A
Specifications
1784-PCD Communication Card (Series C)
PCMCIA Type Type II form-factor network adapter card
PCMCIA Standard Compliant to PCMCIA Standard, release 2.1
Card and Socket Services Standard Compliant to PCMCIA Card and Socket Services Standard, revision 2.1
or greater
Power Requirements PC
5V @ 210 mA maximum
1
DeviceNet Network RATED:
24V dc
2
25 V dc maximum
10 mA minimum
Environmental
Conditions
Operating
3 Non-operating
Slot Temperature 0-50° C (32-122° F) -40-85° C (-40-185° F)
Humidity 5-95% without condensation 5-95% without condensation
Vibration 0-70 Hz constant.012”
displacement
70-500 Hz, constant 2 G
acceleration N/A
Shock 30 G peak/11 ms 50 G peak/11 ms
Agency Certification
(when product or packaging is
marked)
1784-PCD1 Cable
Total length of cable 34.9 cm (13.75 in.)
Pin Assignments See Figure A.1 on page A-2.
1 From host computer, which must be UL Listed Information Technology Equipment or UL Listed Industrial
Control Equipment.
2 Power supplied to the DeviceNet terminals of this equipment must be Class 2 as defined in NFPA-70 National
Electrical Code.
3 The operating parameters describe the environment within the PCMCIA slot. Refer to the documentation for
your computer for environmental requirements. The 1784-PCD card should not exceed those specifications.
marked for all applicable directives
UL Recognized Component - Industrial
Control Equipment