Rockwell Automation 1784-PCD DeviceNet Communication Card - Manual (Page 53)

Install and Use the Driver for Windows 2000 6-3
Publication 1784-IN029C-EN-P - June 2001
2. After you insert the PCD card, the system detects the hardware and begins to
build the driver information needed to run the hardware. If you see the
Digital Signature Not Found screen, click Yes to continue the installation.
3. Because the driver has not been loaded, Windows 2000 displays a new
hardware dialog box and the following message:
TIP
If you insert multiple PC Cards, you may hear more than one
tonal notification per card. Windows 2000 detects devices
during the power up process, and adjusts the device resources
accordingly. This results in sounding multiple tones. When the
system changes settings, for example, when removing a card,
the tones will sound again for each change.
IMPORTANT
If a PCD driver is already installed, remove it by running the
pcdupdt.exe utility from the root of your driver installation disk.
Refer to Update the 1784-PCD Plug and Play Driver on page 6-7.