Rockwell Automation 1784-PCD DeviceNet Communication Card - Manual (Page 64)

7-2 Insert and Remove the 1784-PCD Card
Publication 1784-IN029C-EN-P - June 2001
2. Grasp the card by the edges with the logo facing upward and the 68-pin
connector facing into the PCMCIA slot.
3. Insert the card into the PCMCIA slot and slide the card in until it is firmly
seated in the connector. Some computers have an ejector button that pops
out when the card is seated in the connector.
If the computer is configured properly, your sound/speaker is enabled, and
you installed the 1784-PCD card successfully, you hear multiple tones when
you insert a card or boot the computer.
IMPORTANT
If you have more than one slot in your computer, you can insert
the 1784-PCD card into any empty slot. Check your computer’s
documentation for the slot numbers. You can use the other
available slots for other PC cards such as network or modem
cards.
1. Open the door to the PCMCIA slot.
Some slots do not have doors.
19869