Rockwell Automation 1784-PCD DeviceNet Communication Card User Manual
Devicenet communication card
Table of contents
Document Outline
- 1784-IN029C-EN-P, DeviceNet Communication Card Installation Instructions
- Important User Information
- European Communities (EC) Directive Compliance
- Summary of Changes
- Table of Contents
- Important User Information 2
- European Communities (EC) Directive Compliance 3
- About the Manual P-1
- Rockwell Automation Support P-2
- Abbreviations P-3
- Conventions P-3
- What’s in This Chapter? 1-1
- What is PCMCIA? 1-1
- What is a PC Card? 1-1
- What is the PCD card? 1-4
- What’s in This Chapter? 2-1
- Verify Your Package Contents 2-1
- System Requirements 2-2
- Remove Previously Installed Drivers 2-2
- Determine Which Driver to Install 2-3
- Locate the 1784-PCD Driver 2-3
- What’s in This Chapter? 3-1
- Guidelines for Using the Driver 3-2
- Install the Driver 3-4
- Stop the PCD Card 3-7
- Remove the Driver 3-8
- What’s in This Chapter? 4-1
- Guidelines for Using the Driver 4-2
- Install the Driver in Windows 98 4-3
- Install the Driver in Windows Me 4-7
- Stop the PCD Card 4-9
- Remove the Driver 4-10
- What’s in This Chapter? 5-1
- Do You Have Any of the Following Third-Party Plug-and-Play PC Card Controller Software? 5-2
- Install the Driver 5-4
- Test the PCD Card 5-7
- Remove the Driver 5-8
- What’s in This Chapter? 6-1
- Install the Driver 6-2
- Update the 1784-PCD Plug and Play Driver 6-7
- Stop and Eject the 1784-PCD Card 6-8
- Show the Card Unplug/Eject Icon on the Taskbar 6-11
- What’s in This Chapter? 7-1
- Insert the PCD Card 7-1
- Remove the PCD Card 7-3
- Before You Begin 9-1
- Run the PCD Test Utility 9-2
- Access Diagnostics 9-6
- General Troubleshooting Guidelines 10-1
- Troubleshooting on Windows 95/98/Me 10-2
- Troubleshooting on Windows NT 10-7
- Troubleshooting on Windows 2000 10-10
- 1784-PCD Communication Card (Series C) A-1
- 1784-PCD1 Cable A-1
- 1- About the PCD Card
- 2 - Pre-installation Procedures
- 3 - Install and Use the 16- and 32-bit Drivers for Windows 95
- 4- Install and Use the 32-bit Driver for Windows 98/Me
- 5- Install and Use the Driver for Windows NT
- 6- Install and Use the Driver for Windows 2000
- 7- Insert and Remove the 1784-PCD Card
- 8- Connect the Card to the DeviceNet Network
- 9- Run the 1784-PCD Test Utility and Access Diagnostics
- 10- Troubleshoot the Card
- A- Specifications
- Glossary
- Index