Rockwell Automation 1784-PCD DeviceNet Communication Card - Manual (Page 71)

Publication 1784-IN029C-EN-P - June 2001
Chapter
9
Run the 1784-PCD Test Utility and Access
Diagnostics
Before You Begin
The 1784-PCD Test Utility lets you verify and troubleshoot the installation of your
1784-PCD card on Windows 95/98/Me/2000 and NT platforms. Follow the
procedure in this Chapter to run the test utility and access diagnostics.
Use the PCD_Test.exe program to test the card and driver. The program is in the
PCD_TEST directory on any of the following floppy disks:
• 1784-PCD Installation Windows 95/98/2000/Me 32-Bit Setup Disk
•
1784-PCD Installation Windows NT 4.0 Setup Disk
IMPORTANT
This utility does not work with the Windows 95 16-bit driver.
TIP
Copy the PCD_Test program to your hard drive for easy
access. The batch file
A:\PCD_TEST\CopyPCD_Test2HardDrive.bat
will copy the A:\PCD_Test\ directory to your hard drive as
C:\PCD_Test\.
To: See page:
Run the PCD Test Utility 9-2
Access Diagnostics 9-6