Rockwell Automation 1784-PCD DeviceNet Communication Card - Manual (Page 57)

Install and Use the Driver for Windows 2000 6-7
Publication 1784-IN029C-EN-P - June 2001
8. Once Windows 2000 installs the driver, the following displays.
9. Click Finish.
You may be prompted to restart you computer for the driver to take effect.
10. Run the 1784-PCD Test Utility to verify the installation. Refer to Chapter 9 of
this manual.
Update the 1784-PCD Plug and Play Driver
Perform these steps to update the driver to a newer version:
1. Run the pcdupdt.exe utility from the root of your driver installation disk.
a. Place the 1784-PCD Installation Windows 95/98/2000/Me 32-bit Setup
Disk into your computer’s floppy disk drive.
b. Browse to x:\pcdupdt.exe where x: is your floppy disk drive letter.
c. Double-click on the pcdupdt.exe file to run it.
2. Refer to Install the Driver on page 6-2 to continue installing the driver.
3. Run the 1784-PCD Test Utility to verify the installation. Refer to Chapter 9 of
this manual.