Rockwell Automation 1791P-XXXX CompactBlock Distributed I/O on PROFIBUS DP Series D I.I. - Manual (Page 7)

CompactBlock Distributed I/O on PROFIBUS DP Series D 7
Publication 1791P-IN002B-EN-P - October 2003
Panel Mounting
1. Place the module against the panel where you want to mount it.
2. Drill holes in the panel that are aligned with mounting holes on the
module.
3. Place screws through each of the 2 mounting holes and tighten until
the module is firmly in place.
DIN Rail Mounting
1. Hook top of slot over the DIN Rail.
2. Pull down on the locking lever while pressing the block against the
rail.
3. Push up on the locking lever to secure the block to the rail when block
is flush against the rail.
Status
Network
0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7
CompactBlock I/O
1791P-8V8P
8 INPUTS / 8 OUTPUTS - DC POWER
Allen-Bradley
Profibus DP
Module
Status
Base Module
141 mm
5.55 in
41 mm
1.6 in
43115
Locking Lever
90358