Rockwell Automation 1791P-XXXX CompactBlock Distributed I/O on PROFIBUS DP Series D I.I. User Manual
Page 28

28 CompactBlock Distributed I/O on PROFIBUS DP Series D
Publication
1791P-IN002B-EN-P - October 2003
General Specifications (continued)
Enclosure
Meets IP20
Certifications:
(when product is marked)
c-UL-us UL Listed Industrial Control Equipment,
certified for US and Canada
c-UL-us UL Listed for Class I, Division 2 Group
A,B,C,D Hazardous Locations, certified
for U.S. and Canada
CE
4
European Union 89/336/EEC EMC
Directive, compliant with:
EN 61000-6-4; Industrial Emissions
EN 50082-2; Industrial Immunity
EN 61326; Meas./Control/Lab.,
Industrial Requirements
61000-6-2; Industrial Immunity
C-Tick
4
Australian Radiocommunications Act,
compliant
with:
AS/NZS CISPR 11; Industrial Emissions
1.
Dependant upon the scanner module being used. For example, the SST Scanner (cat. no.
SST-PFB-SLC) does not fully support Fail Safe Mode, as it only resets outputs to 0. You
cannot define behavior such as Hold Last State or Fault Value with the SST scanner.
2.
You use this conductor category information for planning conductor routing as described in
the system level installation manual.
3.
See pub. 1770-4.1, Programmable Controller Wiring and Grounding Guidelines
4.
See the Product Certification link at www.ab.com for Declarations of Conformity,
Certificates, and other certification details.
IMPORTANT
Input and output wiring must be in accordance with
Class 1, Division 2 wiring methods and in accordance
with the authority having jurisdiction.