Rockwell Automation 1791P-XXXX CompactBlock Distributed I/O on PROFIBUS DP Series D I.I. - Manual (Page 12)

12 CompactBlock Distributed I/O on PROFIBUS DP Series D
Publication 1791P-IN002B-EN-P - October 2003
Input Wiring Diagram for 1791D-16V0X Modules
Connect the PROFIBUS DP Terminal Connector
Refer to the following information when connecting the PROFIBUS DP
terminal connector to the 1791P block I/O.
WARNING
If you connect or disconnect the PROFIBUS cable
with power applied to this module or any device on
the network, an electrical arc can occur. This could
cause an explosion in hazardous location installations.
Be sure that power is removed or the area is
nonhazardous before proceeding.
V
DC
GND
IN 0 IN 2
+
IN 8 IN 6
IN 1 IN 3
IN 4
IN 5 IN 7
IN 10
IN 9
IN 12 IN 14
IN 11 IN 15 IN 13
V
DC
GND
-
Not
Used
41670