Rockwell Automation 1420 PowerMonitor 500 - Manual (Page 73)

Rockwell Automation Publication 1420-UM001D-EN-P - September 2013
73
Appendix
C
PowerMonitor 500 EtherNet/IP Device Profile
This section describes the specific CIP Objects, Instances, Attributes, and
Services supported by the PowerMonitor 500 system. This information is for
anyone wishing to integrate the PowerMonitor 500 system into existing or
planned shop floor networks.
General For this device profile, we use a PowerMonitor 500 unit and an EtherNet/IP
communication module to provide power and energy metering data via an
EtherNet/IP network. The data is accessed as instances of the device's Assembly
Object.
This profile documents objects that are proprietary, or in some way altered from
their generic behavior. Standard CIP objects that are generic in their interface are
documented in the EtherNet/IP specification.
Object Model and Interface The PowerMonitor 500 system is represented by the following Object Model.
Identity Object Class Code 01 hex
The Identity Object is used to provide identification information about the
device. Each node supports at least one instance of the identity object. The
Identity Object is used by applications to determine which nodes are on the
network.
See Section 5-2 of the CIP Common Specification for full details of this object.
Object Class Instance Numbers Number of Connections
Identity 1 0
Assembly 100d .. 108d 18