Rockwell Automation 1420 PowerMonitor 500 User Manual
Page 11
Rockwell Automation Publication 1420-UM001D-EN-P - September 2013
11
PowerMonitor 500 Overview
Chapter 1
Figure 1 - Front Panel
1. Active Alarms AL1…AL4 status indicators.
2. Real Energy consumption rate status indicator. Faster flashing indicates
higher rate of consumption. Maximum frequency 16 Hz per EN5047-1.
3. Exit Button - Press quickly to exit submenus, or to exit the programming
menus in Programming mode.
When in the programming menu, press and hold the Exit button for at
least 2 seconds to exit the programming menu. Press Program/select to
confirm and return to the metering display.
Press and hold for more than 2 seconds to view the information pages. In
Metering mode, press quickly to scroll through the energy counters.
4. Up Button - Press the Up button to browse menus and to increase values to
be set.
5. Down Button - Press the Down button to browse menus and to decrease
values to be set.
6. Program/select Button - Press and hold the Program/select button for at
least 2 seconds to access the programming menu.
When in the programming menu, press the Program/select button to
confirm the programmed values in the active page.
When not in the programming menu, press the Program/select button to
select measured values for display. Press quickly to scroll through the
for a list of the measurement screens.
PowerMonitor 500
1
2
3
4
5
6