Rockwell Automation MV SMC Flex OEM Components - Manual (Page 8)

2-2 Receiving and General Information
1503E-IN001E-EN-P – June 2013
Standards and Codes
Important: It is recommended that the user be familiar with the
following safety and design standards and codes, and any additional
local codes that a medium voltage controller must comply with:
• CEC (Canadian Electrical Code)
• CSA 22.2 No. 14 (Canadian Standards Association) - Industrial
Control Equipment
• NEC (National Electrical Code)
• NEMA ICS Standards (National Electrical Manufacturers’
Association)
• OSHA (Occupational Safety and Health Administration)
• UL 50 (Underwriters Laboratories) - Enclosures for Electrical
Equipment
• UL 347 (Underwriters Laboratories) - High Voltage Industrial
Control Equipment
• UL 508 (Underwriters Laboratories) - Industrial Control Equipment
• IEC 60204-1 - Safety of Machinery - Electrical Equipment of
Machines, Part 1: General Requirements
• IEC 62271-200 - AC Metal Enclosed Switchgear and Control Gear
for Rated Voltages Above 1kV and up to 52 kV (formerly IEC
60298)
• IEC 60470 - High Voltage Alternating Current Contactors
• IEC 60529 - Degrees of Protection Provided by Enclosures (IP Code)
• IEC 60694 - Common Clauses for High Voltage Switchgear and
Control Gear Standards
• ICS1- Industrial Control and Systems General Requirements
• ICS3 Part 2 - Industrial Control and Systems - Medium Voltage
Controllers Rated 2001-7200V AC