Rockwell Automation MV SMC Flex OEM Components - Manual (Page 11)

Power Stack Frame Installation 3-3
1503E-IN001E-EN-P – June 2013
A T T E N T I O N A T T E N T I O N The enclosure for the power stack frame
assembly must be adequately sized to provide
sufficient airflow to cool the units. Failure to
provide adequate cooling may result in reduced
duty cycles or component failure.
Use the information included in Table 3.B to assist in determining the
enclosure size.
Dimensions
The power stack frame dimensions are shown in Figure 3.3 below.
The dimensions are the same for all frame catalog numbers.
900 [35.42] 640 [25.19]
890
[35.04]
Front View Side View
Approximate dimensions in millimeters [inches]
900 [35.42] 640 [25.19]
890
[35.04]
Front View Side View
Approximate dimensions in millimeters [inches]
Figure 3.3 – Power Stack Frame Dimensions (4160V, 360A shown)
Sizing the Enclosure