Rockwell Automation 193 193-5.0: Bulletin 913/592 SMP-3 Solid-State Overload Relay - Manual

PLEASE READ!
This manual is intended to guide qualified personnel in the
installation and operation of this product.
Because of the variety of uses for this equipment and because of
the differences between this solid-state equipment and
electromechanical equipment, the user of and those responsible
for applying this equipment must satisfy themselves as to the
acceptability of each application and use of the equipment. In no
event will Allen-Bradley Company be responsible or liable for
indirect or consequential damages resulting from the use or
application of this equipment.
The illustrations shown in this manual are intended solely to
illustrate the text of this manual. Because of the many variables
and requirements associated with any particular installation, the
Allen-Bradley Company cannot assume responsibility or liability
for actual use based upon the illustrative uses and applications.
No patent liability is assumed by Allen-Bradley Company with
respect to use of information, circuits or equipment described in
this text.
Reproduction of the content of this manual, in whole or in part,
without written permission of the Allen-Bradley Company is
prohibited.
IMPORTANT USER INFORMATION
The information in this manual is organized in numbered
chapters. Read each chapter in sequence and perform procedures
when you are instructed to do so. Do not proceed to the next
chapter until you have completed all procedures.
Throughout this manual we use notes to make you aware of
safety considerations:
ATTENTION: Identifies information about
practices or circumstances that can lead to personal
injury or death, property damage or economic loss.
Attentions help you:
D identify a hazard
D avoid the hazard
D recognize the consequences
Important: Identifies information that is especially important
for successful application and understanding of the product.