Rockwell Automation 836E Solid-State Pressure Sensors - Manual (Page 18)

Operation
18
4.1.5 Service Function Setting
• Locking Code
A locking code already assigned can only be changed by first entering the old code for enabling
the device.
SERV Service functions
Security lock-
ing/password pro-
tection Enable password
protection
Password/code
entry Select code 1...9999
0 = no locking
Reset Reset all entries to
the factory setting
Revision counter Increases by 1 with
each configuration
Last device status Displays the last
device status to
occur ≠0
Simulation
output 1 or 2 OFF: No simulation
OPEN: Switch out-
put open
CLOS: Switch out-
put closed
3.5: Simulation val-
ues for analog output
in mA
(3.5/4.0/8.0/12.0/1
6.0/20.0/21.7)
Max. indicator Display of max.
measured
process value
Min. indicator Display of min.
measured
process value