screw hole directly with the notch in the side cutter,
then insert the screw and lightly tighten it. Lower the
presser foot lever and firmly tighten the screw.

6. Select a stitch pattern.

If there is an “S” in the bottom of the key display, the
indicated stitch pattern can be sewn with the side cut-
ter.

Normal sewing

Zigzag stitch

Overcasting stitch for light and medium weight fab-
rics

Overcasting stitch for heavyweight fabrics

Overcasting stitch for medium and heavyweight stretch
fabrics

7. Make a cut of about 20 mm (3/4 inch) in the fabric.

1 20 mm (3/4 inch)

This manual is related to the following products:

ULT2001