When switching on machine, the screen will display the name of the machine. Touch the screen
to display the utility stitch. The often used “Straight stitch (left)” (1-01) is automatically selected.

1 Shows the amount of thread remaining in the

bobbin during sewing. If the display is yel-
low, the bobbin is running out of thread.

Note
This bobbin symbol does not show the
amount of bobbin thread remaining when the
machine is not sewing.

2 Shows single or twin needle mode setting, and

the needle stop position.

3 Presser foot code. Attach the presser foot in-

dicated in this display before sewing.

4 Shows the name and code number of the se-

lected stitch.

5 Shows a preview of the selected stitch.

6 To select, press the key of the stitch pattern

you want to sew.

This manual is related to the following products:

ULT2001