Brother ULT2002D User Manual

Page 37

Text mode
Original mode

1-26

Setting Up

▼

Note
When sewing with fine, cross-wound thread (see the il-
lustration at left), use the small spool cap, and leave a
small space between the cap and the thread spool (see the
illustration at left).

1 Spool cap (small)
2 Thread spool (cross-wound thread)
3 Space

5. Hold the thread from the spool in both hands, and pass

the thread behind the thread guide cover on top of the
machine.
Use both hands to set the thread around the thread
guide plate.
1 Thread guide plate

6. Pull the thread out as indicated on drawing.

This manual is related to the following products:

ULT2001