P.1-35) – Brother ULT2002D User Manual
Page 46
Setting Up
1-35
6
5
5
3
6
7
1
1
9. Set the thread securely into the slit of the disk in the
thread guide. Be sure that the thread catches the cor-
ner of the thread guide.
1 Corner of the thread guide
10.Use the thread cutter on the side of the machine to cut
the thread.
11.Lower the presser foot lever.
CAUTION
Be sure to lower the presser foot lever. Continuing
without lowering the lever may cause damage to the
machine.
12.Push down the needle threader lever as far as possible.
The hook will rotate and pass through the eye of the
needle. Make sure that the hook does not catch the
fabric or any other objects near the presser foot.
1 Hook
This manual is related to the following products: