spool pin, so that the thread unrolls from the back.
Then insert a spool cap onto the spool pin all the way
in, to secure the thread spool.
1 Spool pin
2 Spool cap
3 Additional spool of thread

6. Hold the thread from the spool with both hands, and

set the thread in the thread guide.

* Do not set the thread in the bobbin winding thread

guide.

7. Set the thread around the thread guide plate, then pass

the thread through the groove according to threading
sequence (numbers) indicated on the machine.

This manual is related to the following products:

ULT2001