Brother ULT2002D User Manual
Page 214
Embroidery
5-39
▼
Continuing Embroidery After Turning off the Power
Example: If the power goes off while sewing the second color
1. Select the pattern and press
.
2. Press
to move the second color to the first position in the
display.
3. Use
,
, or
to advance the pattern to slightly
before where sewing stopped.
4. Lower the presser foot lever and start sewing.
CAUTION
To continue a pattern that has had its position changed (see page
5-26), move the pattern the same amount in the layout display
screen, then follow the steps above. In this case, you need to
make a note of the pattern's position before turning off the
power.
Note
Use the
display to remember the last stitch number sewn
before you turn off the power. Then use the
,
,
, or
keys to move the pattern to the same stitch number and con-
tinue sewing.