Ab c – Brother ULT2002D User Manual

Page 137

background image

3-64

Sewing Utility Stitches

1

A

B

C

2. Use

in either the stitch width display or the

stitch length display to choose the size of the eyelet.
Large 7 mm (1/4 inch), Medium 6 mm (15/64 inch),
Small 5 mm (3/16 inch) actual size.

3. Attach monogramming foot “N”, then turn the balance

wheel to check the needle drop position. Lower the
presser foot lever and start sewing. When sewing is
finished, the machine sews reinforcement stitches and
stops automatically.
1 Needle drop position

4. Use the eyelet punch to make a hole in the center of

the stitching.

This manual is related to the following products:

ULT2001