Inserting a side zipper -68, Caution – Brother ULT2002D User Manual
Page 141
3-68
Sewing Utility Stitches
6
1
2
3
4. Remove presser foot “J”. Align the right side of the pin
in zipper foot “I” with the presser foot holder, and at-
tach the zipper foot.
1 Right
2 Left
3 Needle drop position
CAUTION
When using zipper foot “I”, make sure the straight
stitch, middle needle position is selected. Turn the
balance wheel to make sure the needle does not
strike the presser foot. If another stitch is selected,
the needle will strike the presser foot, causing the
needle to break and possible leading to injury.
5. Topstitch 7 to 10 mm (1/4 to 3/8 inch) from the seamed
edge of the fabric, then remove the basting.
CAUTION
Make sure the needle does not strike the zipper
during sewing. If the needle strikes the zipper, the
needle may break, leading to injury.
■ Inserting a Side Zipper
Use for side zippers in skirts or dresses.
1. Select
.
CAUTION
Make sure you sew using the middle needle position.