Brother ULT2002D User Manual
Page 107
3-34
Sewing Utility Stitches
J
1
2
Rough sketch (line)
4. Set the speed control slide to control the stitch width.
Press
.
5. In the
display, change the set-
ting to “ON.”
During this process:
* You can use the speed control slide to adjust the stitch
width.
* Use the foot controller to adjust the sewing speed.
6. Press
to return to the original screen.
7. You can adjust the stitch width during sewing by mov-
ing the sewing speed controller. Slide the lever to the
left, and the stitch width becomes narrower. Slide it to
the right, the stitch width becomes wider. The size of
the width changes equally on both sides of the middle
needle position.
1 narrower
2 wider
This manual is related to the following products: