Brother ULT2002D - Manual (Page 209)

5-34 Embroidery
1 —
2 —
3 —
4 —
5 —
6 —
7 —
8 —
?!
9 —
CONTENTS
Index
4. Set the base fabric for the appliqué in the embroidery
frame, and embroider “Appliqué Position.”
* Use the same thread color you plan to use when
attaching the appliqué in the next step.
5. Apply a thin layer of fabric glue or temporary spray
adhesive to the back of the appliqué material cut out
in step 2, and place it on the base fabric, aligning the
appliqué with the “Appliqué Position” pattern from step
4.
6. After attaching the appliqué material, sew “Appliqué.”
7. To sew the rest of the embroidery pattern, change the
thread to the next thread color on the color sewing
order display, and begin sewing.