Rockwell Automation 23P PowerFlex DC Stand Alone Regulator and Gate Amplifier - Manual (Page 79)

Rockwell Automation Publication 23P-UM001D-EN-P - July 2012 79
Specifications Appendix A
SD3K-CBLBOXA048
SD3K-CBLBOXB048 973054 00
(substitute “
00” with desired
code)
01 02
Motoring (S6), 48” gate leads
(6 total)
Motoring & Regen (S6R), 48” gate leads
(12 total)
Connects the output side of one (1) gate coupler to its corresponding SCR in the Power
Box.
Picture/Details
(1 of 6 pairs)
This end connects to the output pins on the Gate Coupler Board
identified as “WW2”. This end connects to the “gate” (white) and
“cathode” (red) terminals of the SCR.
SD3K-CBLCANNON***
*** (length in inches)
973055 00
(substitute “
00” with desired
length code)
01 02 03 04
60” 72” 96” 120”
Connects the FORWARD or REVERSE gate signals from a cable with a “Round Cannon”
style mating connector to the primary side of six (6) individual gate couplers. This cable
assembly should be mounted to bracket P/N 608877-6A for strain relief.
Picture/Details
This end connects to Gate Amplifier cable assembly 973051xx or
973053xx. Each connector on this end connects to the input
pins on the Gate Coupler Board identified as
“WW1”.
SD3K-CBLCPLR***
*** (length in inches)
973291
00
(substitute “ 00” with desired
length code)
01
72”
Connects the output side of the six (6) gate couplers (inside of the Gate Coupler
Assembly) to their corresponding SCR gates in the Power Box.
(S6 only; use a second set for an S6R application or consider using 97305402.)
Picture/Details
(1 of 6 pairs)
This end connects to the output pins on the Gate Coupler Board
identified as “WW2”. This end connects to the “gate” (white) and
“cathode” (red) terminals of the SCR.
SD3K-CBLGSCLIF***
*** (length in inches)
973300
00
(substitute “ 00” with desired
length code)
01 02 03 04 05 06 07 08 09
24” 36” 60” 120” 180” 240” 300” 360” 480”
Connects the FORWARD gate signals from the Gate Amplifier Control to the Gate
Scaling Module (INPUT connector).
Picture/Details
This end connects to one of the FORWARD OUTPUT connectors of the
Gate Amplifier. This end connects to the INPUT connector of the
Gate Scaling Module.
Catalog Number Part Number Description/Length
XXX
G2
G
3
G6
G5
G4
G1
XXX
FWD-GATES-OUT GATE-SCALING-IN-FWD 973300xx