Rockwell Automation 23P PowerFlex DC Stand Alone Regulator and Gate Amplifier - Manual (Page 12)

12 Rockwell Automation Publication 23P-UM001D-EN-P - July 2012
Chapter 1 Introduction
Stand Alone Regulator Features
• Rockwell Automation Architecture Class networking capable
Available Options
• Resolver Feedback
Catalog Numbers
This table lists the available catalog numbers for the SAR.
Note: All models contain conformal coated circuit boards.
Gate Amplifier Features
• Interfaces to the PowerFlex DC, SD3000
PLUS or PMI regulators
• Flexible configurations S6 and S6R
• Power module interface
• Interlock via “Ready Relay” contacts to main drive control
Available Options
• 48V gate drive capability with an external power supply
Model and Cable Model/Part Numbers
This table lists the cable module numbers and part numbers for the Gate
Amplifier.
230V / 460V AC Input
Catalog Number 575V / 690V AC Input
Catalog Number: Field Amps
23PMD4 23PMF4 40
23PMD7 23PMF7 70
Product: Model/Part Number:
Gate Amplifier 23PAMP
PowerFlex DC to Gate Amplifier Cable See Cable Specifications on page 78 .
SD3000 PLUS to Gate Amplifier Forward Cable SD3K-CBLGSCLIFxxx (1)
(1) xxx = length in inches.
SD3000 PLUS to Gate Amplifier Reverse Cable SD3K-CBLGSCLIRxxx
(1)
PMI Rack to Gate Amplifier Forward Cable 612432-xxxS
(1)
PMI Rack to Gate Amplifier Reverse Cable 612433-xxxS (1)