Western Digital WD ShareSpace User Manual - Manual (Page 95)

NETWORK STORAGE MANAGER: BASICS - 90
WD SHARESPACE
USER MANUAL
4. Read the license agreement, and then click I Agree.
5. In the Initial Setup screen, do the following:
(a) Enter a name in the Device Name field (up to 15 characters, including alphanumeric and
dash ‘-’).
Note: The device name is used to identify the storage device connected to the network and appears
in My Network Places. To connect more than one storage device to the same network, you must
specify a unique device name for each storage device.
WARNING! Renaming WD ShareSpace forces all the network computers
to remap their shared network resources. Change the device name only
when necessary.
(b) Enter a brief description of the device in the Device Description field. The maximum length
of the description is 42 alphanumeric characters.
(c) Select a time zone from the Time Zone list.
(d) If necessary, adjust the date and time manually using the Date & Time lists.
Click Next.