Western Digital My Book World Edition (white light) User Manual - Manual (Page 110)

NETWORK STORAGE MANAGER: ADVANCED MODE - 104
MY BOOK WORLD EDITION
USER MANUAL
Note: E-mail alerts may not work with some ISPs using strong spam filtering. For further information,
go to support.wdc.com and search the knowledge base for answer ID 2570.
To set up automatic e-mail notifications:
1. On the Alerts Setup page on the System tab, click Enable next to E-mail
Notification.
2. In the SMTP Server field, enter the name or IP address of the SMTP server used
for e-mail. (Check with your Internet Service Provider (ISP) for the SMTP server
settings, which may include the SMTP port, and ask whether to enable TLS / SSL
or SMTP authentication.)
3. In the Email Return Path field, enter a valid return e-mail address recognized by
your ISP. For example, if your SMTP server is "smtp.myisp.net", then you should
enter a valid return e-mail path address of the form "[email protected]".
4. In the Email Recipients field, enter the e-mail address where you want to send
an e-mail message when an event occurs. Up to five e-mail addresses can be
used at a time.
5. Click Send Test Mail to send a test alert and confirm your settings are correct.
A test message is sent to each entered e-mail address.