Waldmann PULSE PIR version IV - with MFT, Typ II - Manual (Page 26)

26
Operating Manual Light Control „PULSE HFMD / PULSE PIR - Vers. IV“ ENG
Loading setting level 2
Actuation Display
Light bar LED 1 (dark green)
Parameterisation mode ON
Function 2.3 Special function
Light bar LED 3 (yellow)
Function 2.3
Changing the function from ON to OFF or vice versa
Setting function 2.3
LED changes from constantly lit
to flashing or vice versa:
- constant = Function ON
- flashing = Function OFF
Loading the parameterisation mode
Press both keys again
for 5 seconds
Light bar LEDs 1+2
Level 2
Press key II twice
Press both keys
for at least 10 seconds
2 x
Special function
The special function cannot be
used.
The function cannot be changed.
n x
Press key I as often as
necessary for reaching
the desired value