Waldmann PULSE PIR version IV - with MFT, Typ II - Manual (Page 20)

20
Operating Manual Light Control „PULSE HFMD / PULSE PIR - Vers. IV“ ENG
Loading setting level 1
Actuation Display
Light bar LED 1 (dark green)
Parameterisation mode ON
Function 1.5 Light control
Light bar LED 5 (light red)
Function 1.5
Changing the function from ON to OFF or vice versa
Setting function 1.5
LED changes from constantly lit
to flashing or vice versa:
- constant = Function ON
- flashing = Function OFF
Press key II 4 times
Loading the parameterisation mode
Release both keys
Light bar LED 1 (dark green)
Level 1
Light control
Function for the automatic readjust-
ment of the set brightness in case
the ambient brightness changes.
By default, the function is set
to "ON", i.e., the light control is
functioning.
If the light control is off, the light
functions as a dimmable light.
The function can be changed on
- Lights equipped with HFMD
sensor
- Lights equipped with PIR sensor
Press both keys
for at least 10 seconds
4 x
n x Press key I as often as
necessary for reaching
the desired value