Waldmann PULSE PIR version IV - with MFT, Typ II - Manual (Page 21)

21
Operating Manual Light Control „PULSE HFMD / PULSE PIR - Vers. IV“ ENG
Loading setting level 1
Actuation Display
Light bar LED 1 (dark green)
Parameterisation mode ON
Function 1.6 Presence control
Light bar LED 6 (dark red)
Function 1.6
Changing the function from ON to OFF or vice versa
Setting function 1.6
LED changes from constantly lit
to flashing or vice versa:
- constant = Function ON
- flashing = Function OFF
Press key II 5 times
Loading the parameterisation mode
Release both keys
Light bar LED 1 (dark green)
Level 1
Presence control
Function for detecting the pres-
ence of persons.
By default, the function is set to
"ON", i.e., the presence control is
functioning.
When the function is on, the light
will be automatically switched off
when no presence is detected over
a certain period of time.
If the presence control is switched
off, the light functions as a light
with light control or as a dimmable
light.
The function can be changed on
- Lights equipped with HFMD
sensor
- Lights equipped with PIR sensor
5 x
Press both keys
for at least 10 seconds
n x Press key I as often as
necessary for reaching
the desired value