Waldmann PULSE PIR version IV - with MFT, Typ II - Manual (Page 22)

22
Operating Manual Light Control „PULSE HFMD / PULSE PIR - Vers. IV“ ENG
Loading setting level 1
Actuation Display
Light bar LED 1 (dark green)
Parameterisation mode ON
Function 1.7 Demo mode
Light bar LEDs 5+6
Function 1.7
Changing the function from ON to OFF or vice versa
Setting function 1.7
LEDs change from constantly lit
to flashing or vice versa:
- constant = Function ON
- flashing = Function OFF
Press key II 6 times
Loading the parameterisation mode
Release both keys
Light bar LED 1 (dark green)
Level 1
Demo mode
Function for demonstration and for
testing the light functions.
By default, the function is set to
"OFF", i.e., the demo mode is not
functioning.
When the demo mode is on, all
control times are effective within
seconds.
Note: This mode is left automati-
cally 10 minutes after the last key
press.
The function can be changed on
- Lights equipped with HFMD
sensor
- Lights equipped with PIR sensor
Press both keys
for at least 10 seconds
6 x
n x Press key I as often as
necessary for reaching
the desired value