Waldmann PULSE PIR version IV - with MFT, Typ II - Manual (Page 17)

17
Operating Manual Light Control „PULSE HFMD / PULSE PIR - Vers. IV“ ENG
Loading setting level 1
Press both keys
for at least 10 seconds
Actuation Display
Light bar LED 1 (dark green)
Parameterisation mode ON
Function 1.2 External switching
Light bar LED 2 (light green)
Function 1.2
Changing the function from ON to OFF or vice versa
Setting function 1.2
LED changes from constantly lit
to flashing or vice versa:
- constant = Function ON
- flashing = Function OFF
Press key II once
Loading the parameterisation mode
Release both keys
Light bar LED 1 (dark green)
Level 1
External switching
Function for operating the light via
external switching elements.
By default, the function is set to
"OFF". When power is supplied
from an external source, the light
remains switched off.
When the function is on, the light
will switch to the level set last
as soon as the power supply is
connected (e.g. via a switched
socket).
The function can be changed on
- Lights equipped with HFMD
sensor
- Lights equipped with PIR sensor
- Dimmable lights
1 x
n x Press key I as often as
necessary for reaching
the desired value