Vicor Westcor PFC MegaPAC Power Factor Corrected AC-DC Switchers - Manual (Page 28)

UG:105 vicorpower.com Applications Engineering: 800 927.9474 Page 28
Current Share Boards - Optional Feature (Cont.)
P1
24.0" +/- 1.0"
Power
T1
-V1
T2
-V2
Red, 22 AWG
Yellow, 22 AWG
Brown, 22 AWG
White, 22 AWG
Black, 22 AWG
1 2
3 4
5 6
1.74"
(44.2mm)
0.12"
(3.0mm)
1.500"
(38.1mm)
0.12"
(3.0mm)
0.900"
(22.9mm)
1.14"
(29.0mm)
0.13" (3.3mm) Dia Non
Plated thru hole 4
places
Molex CT43045F surface mountable
connector. .390" height above board.
P i n D e s c r i p t i o n
1 P o w e r
2 T 1
3 - V 1
4 T 2
5 - V 2
6 N o C o n n e c t i o n
J1 Pinout
Figure 13. Mechanical Drawing
Figure 14. Cable Drawing
Specifications:
1. Power: 2-50 Vdc at 5 mA maximum.
2. Accuracy: +/- 1 mV between -Vout connections.
3. Output current when not trimming up: +/- 1 uA (VI-200/J00),
+/-5 uA (Maxi/Mini/Micro).
4. Use 4 non-plated through holes with standoffs for mounting.
5. CSB01 MUST be used for current sharing VI-200/VI-J00 converters (VI-200/J00).
6. CSB02 MUST be used for current sharing Maxi/Mini/Micro converters
(Maxi, Mini and Micros).
PLEASE NOTE, THE CSB IS NOT INTENDED FOR HOTSWAP APPLICATIONS
Contact your Regional Applications Engineer at 1-800-927-9474
for additional information.