Vicor PF175 AC-DC Converter Evaluation Board with External Input Filter User Manual
User guide | ug:100
UG:100
vicorpower.com
Applications Engineering: 800 927.9474
Page 1
PF175 AC-DC Converter Evaluation Board
with External Input Filter
USER GUIDE | UG:100
January 2013
Features
n
Oscilloscope probe jack for output voltage and ripple measurements
n
Simple to use
n
Ring lug, screw terminal, and solder connection options
n
Replaceable fuse (5A, 216 Littelfuse recommended)
IMPORTANT NOTICE
Please read this document before setting up an evaluation board.
Introduction
This Evaluation Board offers a convenient means to evaluate the performance of Vicor’s
VI Brick® PFM Isolated AC-DC Converter modules with Power Factor Correction, and
has been optimized for user convenience. Refer to Table 1 for operating conditions
and limits.
This reference design contains an input line filter. It is important to remember the
response of the AC line filter is dependent upon the wiring connected to the evaluation
board. Care should be exercised to minimize stray source impedances in order to fully
exercise the features of the converter.
Contents Page