Therma-Tru SHOP 3 Door Preparation - Book Size - Manual (Page 61)

Door
Preparation
Shop 3 2014 (BOOK SIZE) 3.61
Decorative Hinge Strap &
Clavos Application
3/8"
from
door
edge
INSTALLATION:
1. Locate strap hinges 3/8" from edge of
door at desired locations.
2. Using masking tape, mark the location
of the strap hinges on the door.
3. Moisten a clean cloth with 70% Isopropyl
Alcohol and clean the area where the
hinges will be applied.
4. Remove backing tape from the tape on
one hinge and attach it to the door.
NOTE: Hinge cannot be moved once
placed on the door.
5. Press the hinge firmly in place at the
location of each tape backer. 35 pounds
of force is required at each location.
6. Repeat for each other hinge.
INSTALLATION:
1. Locate clavos on door
at desired locations.
2. Using masking tape, mark the location
of the clavos on the door.
3. Moisten a clean cloth with 70% Isopropyl
Alcohol and clean the area where the
clavos will be applied.
4. Remove backing tape from the tape on
one clavos and attach it to the door.
NOTE: clavos cannot be removed once
placed on the door.
5. Press the clavos firmly in place at the
location of the tape backer.
35 pounds of force is required.
6. Repeat for each clavos.