Screen installation, French door hinged screen installation – Therma-Tru Doors Installation User Manual
Page 73
![background image](/manuals/574353/73/background.png)
Installation
SITE 1
2014
1.73
Screen Installation
Position the right or left door panel into the frame.
Be sure the side hinged channel aligns properly with the
head jamb miter.
Using a 1/8” drill bit, pre-drill a hole into the side
brickmould using the pre-punched hole in the aluminum
channel as a guide.
Fasten side jamb channel to side brickmould using #8 x 1”
stainless steel screws and check for proper alignment
Repeat for remaining door panel.
1
1750 Indian Wood Circle Maumee, OH 43537
1-800-THERMATRU (843-7628)
www.thermatru.com
Left hinge door
panel side jamb
and bottom
expander
attached
Right hinge door
panel side jamb
and bottom
expander
attached
Astragal
Head Channel
Door Handle Package
Spring Latch (2)
20 - 1” Stainless Steel Screws
4 - 3/4” Stainless Steel Screws
Place head channel at the top of the door opening on the
exterior side, centering it between the right and left side
jambs.
Using a 1/8” drill bit, pre-drill a hole in the head brickmould
using the pre-punched holes in the aluminum channel as
a guide.
Fasten head channel to head brickmould using #8 x 1”
stainless steel screws.
Trim the black rubber door sweep even with the adjustable
bottom expander. Crimp the ends of the slot with pliers
to prevent the sweep from sliding out.
3
Install the handle hardware on the active door .
CAUTION: BE SURE TO POSITION THE SCREEN
DOOR HANDLE SO THAT IT DOES NOT INTERFERE
WITH THE OPERATION OF THE HANDLE SET
ON THE PRIMARY DOOR.
At desired height, fold self-
adhesive template to door.
Mark center of the three
holes on both sides
Using a 5/16” drill bit,
bore the three holes 1/2
way through on both sides.
Note: Ream out center hole by inserting drill and rotating
with a slight wobbling action to clear hole and allow
complete freedom of action for spindle.
SPINDLE MUST BE FREE.
4
French Door Hinged Screen Installation
2
© 2005 Therma-Tru Corp.
Therma-Tru Doors is an operating company of Fortune Brands, Inc.
Part # DDSINSTALL
1/1/05
French Door Hinged Screen Materials Supplied
Bottom of Door
Crimp Here