Therma-Tru Doors Installation - Manual (Page 61)

Installation
SITE 1 2014 1.61
Sill Instructions
Adjustable Sill Cover Instructions
1. Position cover and hook onto sill.
NOTE: Be sure to remove sill cover before
any type of floor covering is installed
Corner Seal Pad Instructions
Basic Fixed Sills
1. Place a 1/4” bead of
sealant at corners where saddle
meet side jambs.
(Elastomeric and Polyurethane)
s
2. Remove paper backing from corner
seal pad and position pad tight to the
saddle, tucking behind weatherstrip
and in line with edge of jamb. Place
“hook” over inside edge as shown.
NOTE: Corner seal pads are handed.
The Most Preferred Brand in the Business
®
MSCSPSA
Corner Seal Pad
Vinyl Saddle
“Hook”
Jamb
Weatherstrip
Sealant
Saddle
Weatherstrip