Regency Liberty L965E Large Gas Fireplace - Manual (Page 53)

TRANSMITTER (Remote Control with LCD
Display)
The Proflame Transmitter uses a streamline design with a simple
button layout and informative LCD display (Figure 99).
The Transmitter is powered by three (3) AAA type batteries. A
Mode Key is provided to Index between the features and a Ther-
mostat Key is used to turn on/off or index through Thermostat
functions (Figure 103 & 104).
RECEIVER
The Proflame Receiver (Figure 101) connects directly to the gas valve,
stepper motor, DFC, and Fan Control Module with a wiring harness. The
Receiver is powered by 110 V and uses four (4) AA type batteries for
backup. The Receiver accepts commands via radio frequency from the
Transmitter to operate the appliance in accordance with the particular
Proflame system configuration. The Receiver three (3) position slider
switch can be set to one of three positions: ON (Manual Override),
Remote (Remote control), or Off.
Figure 103: Proflame Transmitter.
Figure 104: Proflame Transmitter LCD Screen.
Figure 105: Proflame Receiver.
FAN CONTROL MODULE
Fan Control Module (FCM) offers the added ability to control
the fan speed through six (6) speeds, a remotely actuated 120V
outlet and a constantly powered 120V outlet. The FCM provides
DC power to the Receiver allowing the batteries to be used only
when line power is interrupted or lost (see Figure 106).
Figure 106: Proflame Fan Control Module.
Regency L965E / HZ965E Gas Fireplace
53 53
INSTALLATION OPERATING INSTRUCTIONS