Regency Liberty L965E Large Gas Fireplace - Manual (Page 13)

Figure 16. Typical Facing for the Fireplace - General.
There are three (3) options for installing facing to your fireplace installation. Care must be
taken to ensure proper clearances are maintained.
Failure to maintain this clearance will lead to elevated operating temperatures and possible
discoloration of materials.
Three (3) possible installations include:
1) For fireplace facing less than 1” thick (total facing and non-combustible board combined)
with an optional front installed.
2) For fireplace facing greater than 1” thick with an optional front installed.
3) For any fireplace facing without an optional front installed.
Figures 17 to 19 highlight the relationships between the fireplace, optional front, and facing
installed.
Figure 17. Option 1 - Fireplace Facing Less
Than 1” (25.4mm) Thick.
NOTE: REQUIRES 5/8”(16mm)_AIR GAP
INSTALLATION OF FIREPLACE FACING:
Figure 18. Option 2 - Fireplace Facing More
Than 1” (25.4mm) Thick With Optional Front
Installed.
NOTE: REQUIRES 3/4”(19mm) AIR GAP
Figure 19. Option 3 - Any Fireplace Facing
Without Optional Front Installed.
Regency L965E / HZ965E Gas Fireplace
13
INSTALLATION