Regency Liberty L965E Large Gas Fireplace - Manual (Page 43)

GLASS BURNER REMOVAL/INSTALLATION:
1) Removal the front panel of the burner by removing 2 screws in the locations
shown in Figure 61 and Figure 62.
4) Carefully pull the burner forward (see Figure 65) away from the
mixing tubes. When clear of the mixing tubes, lift the burner
up and out.
5) To install, reverse steps.
2) After the screws are removed, lift out the front panel as shown in Figure 63.
3) Remove the 4 screws on the burner in locations shown in Figure 64.
Figure 63: Lift Out Front Panel
Figure 64: Burner Screw Locations
Figure 65: Move Burner away from Mixing Tubes
Figure 62: Removing Front Panel
Screws
Figure 61: Front Panel Screw Locations
Regency L965E / HZ965E Gas Fireplace
43
INSTALLATION