Regency Liberty L965E Large Gas Fireplace - Manual (Page 32)

Figure 8: Install the power vent.
Figure 9: Securing cord with the Strain Relief.
7. Assemble the outer thimble to the inner thimble and secure the outer thimble to the wall board with screws.
8. Insert the power vent electrical cord through the Strain Relief on the bottom right of the power vent assembly, refer to Figure 8.
9. Align the power vent assembly with the direct vent pipe that is protruding through the thimble.
10. Secure the power vent assembly in place with screws as seen in Figure 8.
Inner Thimble
Power Vent
Electrical Cord
Bushing
Screw
Wall Board
Figure 6: Install the inner thimble and the power
vent cords.
Outer Thimble
Bushing
Vents
Screw
Inner Thimble
Wall Board
Power Vent
Electrical Cord
Figure 7: Install the outer thimble.
32
Regency L965E / HZ965E Gas Fireplace
INSTALLATION