Steriflow SHC Series - Manual (Page 4)

SVC/SHC S
erieS
S
anitary
C
HeCk
V
alVeS
shc (h
orizontal
) s
eries
o
rDering
s
cheMatic
Model Number
SHC Standard
Size
050 1/2" (DN15)
075 3/4" (DN20)
100 1" (DN25)
150 1-1/2" (DN40)
200 2" (DN50)
Body Material
6L ASTM A479, 316L
1 & 2 Body
TC Tri-Clamp
TE Tube End
3 & 4 Disc
TF Teflon (FDA and USP Class VI)
S6 316L SST (1/2" - 1" valves only)
SE 316L/EPDM (FDA and USP Class VI) 1
PK PEEK (FDA and USP Class VI)
ZZ Non-Standard
5 & 6 O-Ring
EP EPDM 1
SL Silicone 2
TF Teflon 2
VT Viton 2
ZZ Non-Standard
Model
—
Size
—
Body Mat'l 1 2 3 4 5 6
sVc (V
ertical
) s
eries
o
rDering
s
cheMatic
Model Number
SVC Standard
Size
050 1/2" (DN15)
075 3/4" (DN20)
100 1" (DN25)
150 1-1/2" (DN40)
200 * 2" (DN50) bolted clamp (BC) only
300 * 3" (DN80) bolted clamp (BC) only
Body Material
6L ASTM A479, 316L
1 & 2 Inlet Body
TC Tri-Clamp to ASME BPE
TE Tube End to ASME BPE
TA Tube End to DIN 11866 Row A
TB Tube End to DIN 11866 Row B (ISO)
3 & 4 Outlet Body
TC Tri-Clamp to ASME BPE
TE Tube End to ASME BPE
TA Tube End to DIN 11866 Row A
TB Tube End to DIN 11866 Row B (ISO)
5 & 6 Disc
TF Teflon (FDA and USP Class VI) 1
S6 316L SST 2 (1/2" - 1" valves only)
SE 316L/EPDM (FDA and USP Class VI)
PK PEEK (FDA and USP Class VI) 4
PP* NEW - Polypropylene (FDA and USP Class VI) 5
ZZ Non-Standard
Model
—
Size
—
Body Mat'l 1 2 3 4 5 6
7 & 8 Gasket
01 Silverback (FDA and USP Class VI)
02 TFE/Viton (FDA and USP Class VI)
03 TFE/EPDM (FDA and USP Class VI)
04 Viton-600S (FDA and USP Class VI)
05 TUF-Steel (FDA and USP Class VI)
ZZ Non-Standard
9 & 10 Tri-Clamp
2P 2-Piece
3P 3-Piece
BC* Bolted Clamp req for operation above 250°F (121°C)
ZZ Non-Standard
SVC/SHC/0414
1 Disc rated to 275°F (135°C) at 230 psi (16 bar) with any disc; EPDM
O-ring same limits with any disc.
2 Rated to 350°F (176°C) with TFE disc, 400°F (204,4°C) with PEEK or
316SS disc, 275°F (135°C) with 316/EPDM disc. All ratings @ 230 psi
(16 bar)
1 Rated 350°F (176°C), @ 230 psi (16 bar) for all gaskets, except TFE/EPDM,
which is rated at 275°F (135°C) @ 230 psi (16 bar).
2 Rated 400°F (204°C) @ 230 psi (16 bar) for all gaskets except TFE/EPDM,
which is rated at 275°F (135°C)@ 230 psi (16 bar)
3 Rated 275°F (135°C), @ 230 psi (16 bar), for all gasket materials
4 Rated 450°F (232°C) @ 230 psi (16 bar)with Tuf Steel or Silverback gaskets;
rated 400°F (204°C) @230 psi (16 bar); with any Viton gasket; Rated 275°F
(135°C)@ 230 psi (16 bar); with TFE/EPDM gasket.
5 Rated 176°F (80°C ) @ 230 psi (16 bar) for all gaskets. Note: For SIP service,
rated to 275°F (135°C) @ 30 psi (2 bar) for all gaskets.
* Polypropylene is for SVC vertical downflow, drain applications.
*2" & 3" size option BC only