Steriflow JSRH Series - Manual (Page 2)

JSRH S
eRieS
H
igH
F
low
B
io
-P
HaRma
C
lean
g
aS
P
ReSSuRe
R
eduCing
V
alVe
s
peciFications
Sizes: 1/2" (DN15), 3/4" (DN20) & 1" (DN25)
Connection and gauge port ends: Tri-clamp, Tube
weld end and NPT Standard. VCR ® connections
optional, contact factory
Body Material: All wetted parts - ASTM A479 316L
Stainless Steel; others on application
Body Seals: Elastomer o-rings (EPDM, Viton,
Silicon, Kalrez); PTFE gasket - All FDA and USP
Class VI compliant
Soft Seat: PTFE to +252°F (122°C) continuous or
275°F(135°C) intermittent [not to exceed 15 min. in a one
hour period]
FDA, USP Class VI
Shutoff: Class VI
Spring Range:
Flow Capacity:
• 1/2" Cv: 1.5
• 3/4" & 1": Cv: 1.9
Mechanical Polish: Wetted Internal components
to 20Ra μin (0.5 Ra μm), electropolished
• 0 - 150 psi (0 - 10,3 bar)
• 0 - 100 psi (0 - 6,9 bar)
• 0 - 50 psi (0 - 3,4 bar)
• 0 - 20 psi (0 - 1,4 bar)
Sizing: Use SVCV Steriflow software sizing
module, size at 60% capacity
Maximum Operating Pressure: 230 psi max inlet
@ 100°F / psi max ∆P
Maximum Operating Temperature: 150 psi max
inlet @ 275°F
D
imensions
6.00
(152)
1.02 (26)
6.29 (160)
-2-