Brother 8060P MFC-9060 - Manual (Page 77)

67
S E T U P Q U I C K - D I A L N U M B E R S
8 The screen prompts you to select the type of number this is. Use
or to select the type you want.
FAX a fax number
TEL a telephone (voice) number
F/T both a fax and telephone number
9 Press Set .
10 Return to Step 2 to store another Speed Dial number. ––OR–– Press
Stop to exit.
Changing One Touch and
Speed Dial Numbers
If you try to store a One Touch or Speed Dial number in a location where
a number is already stored, the screen displays the current name stored
there, then prompts you to either change it or exit.
1.CHANGE 2.QUIT
1 Press 1 to change the number stored, or press 2 to exit without
making a change.
2 Enter a new number.
■ If you want to erase the number, press Stop when the cursor is
to the far left of the digits. The letters above and to the right of
the cursor will be deleted.
■ If you want to change a digit, use or to position the cursor
under the digit you want to change, then enter it.
3 Follow the directions in Storing One Touch Dial or Speed Dial
Numbers.
Setting Up Groups for Broadcasting
Groups allow you to send the same fax message to many fax numbers by
pressing only one One Touch key. (This is called Broadcasting.) First,
you’ll need to store each fax number as a One Touch or Speed Dial
number. Then, you can combine them into a Group. Each Group uses up
a One Touch key. Finally, you can have up to 6 small Groups, or you can
assign up to 45 (FAX-8060P) or 37 (MFC-9060) numbers to one large
Group.
You can include up to 15 (FAX-8060P) or 7 (MFC-9060) One Touch
locations, or up to 30 Speed Dial locations. If you broadcast to more than
the maximum locations available, you will be unable to set up
transmissions using Dual Access and the Timer.
See
“Storing
One Touch
Dial
Numbers”
and
“Storing
Speed Dial
Numbers”
in this
chapter