Brother 8060P MFC-9060 - Manual (Page 62)

52
C H A P T E R S I X
If you try to scan in and store a 51st fax, the machine will send it
immediately, without storing it in memory.
If you get a MEMORY FULL message while scanning the first page of
a fax press
Stop to cancel a scan. If you get a MEMORY FULL
message while scanning in a subsequent page, you’ll have the option to
press
Start to transmit the pages scanned so far, or to press Stop to
cancel the operation.
1 Make sure the document feeder is empty.
2 Place the document in the feeder.
3 Enter the fax number.
4 Press Start . The machine starts scanning the document and the
screen displays the job number (#XX) of the fax, and how much
memory is available. When the machine starts dialling you can
immediately repeat Steps 1 through 4 for the next fax.
Real Time Transmission
When you are sending a fax, the machine will scan originals into
memory before sending. Then, as soon as the phone line is free, the
machine will start dialing and sending the fax. If memory becomes full,
the machine will send the document in real time, even if REAL TIME
TX is set to OFF.
Sometimes you may want to send an important document immediately,
without waiting for memory transmission. You can set REAL TIME TX
to ON.
1 Place the document in the feeder.
2 Press Menu , 3 , 9 .
The screen displays
9.REAL TIME TX
3 To change the default setting, press or to select ON (or OFF)
and go to Step 7. ––OR–– For the next fax transmission only, press
or to select NEXT FAX ONLY.
REAL TIME TX:ON
4 Press Set .
5 For the next fax only, press or to select ON (or OFF).
See
“One Touch
and Speed
Dial”
chap. 7