Brother 8060P MFC-9060 - Manual (Page 34)

24
C H A P T E R T H R E E
4. REMAINING JOBS
Function Description Factory Set Chapter
Cancel a delayed fax (timer) or 6
polling job.
5. INTERRUPT
Function Description Factory Set Chapter
Send a fax now, even if you 6
have the machine set to send a
fax later, or if you have it set
for Polling.
6. SET QUICK-DIAL
Function Description Factory Set Chapter
1. ONE-TOUCH DIAL Dial numbers stored in memory -- 7
by pressing only one key.
2. SPEED-DIAL Dial numbers stored in memory -- 7
by pressing only three keys.
3. SETUP GROUPS Set up a Group number for -- 7
broadcasting.
7. PRINT REPORTS
Function Description Factory Set Chapter
1. XMIT REPORT Print confirmation of OFF 10
transmission after each
document is sent.
2. JOURNAL Lists information about the last JOURNAL:OFF 10
50 incoming and outgoing
faxes.
3. QUICK-DIAL Lists names and numbers stored -- 10
in One Touch and Speed Dial
memory (in numerical order).
4. TEL. INDEX Alphabetical list of stored -- 10
numbers.
3. SETUP SEND (continued)
Function Description Factory Set Chapter
8. POLLED TX Set Polled Transmission for -- 6
someone to poll your fax
machine to receive a fax from
you.
9. REAL TIME TX NEXT FAX ONLY/ON/OFF OFF 6