Brother 8060P MFC-9060 - Manual (Page 123)

113 U S I N G T H E W I N D O W S ® – B A S E D B R O T H E R C O N T R O L C E N T R E
( F O R M F C - 9 0 6 0 O N L Y )
Using the Control Panel Keys
Before you can use the Scan key on the control panel, you must have
connected the MFC to your Windows ® -based PC and loaded the
appropriate Brother Drivers for your version of Windows ® . When you
are ready to use the Scan key, make sure the Brother Control Centre
application is running on your PC.
Scan Image
You can scan a picture into your graphics application for viewing and
editing.
1 Place the original face down in the ADF.
2 Press Scan .
SCANNING:IMAGE
SELECT { } & SET
3 Press or to select SCANNING:IMAGE and press Set .
The MFC will scan the original and send an image to your graphics
application.
Scan/OCR
If your original is text, you can have it automatically converted by
ScanSoft™ TextBridge
® to an editable text file and then displayed in
your word processing application for further editing.
1 Place the original face down in the ADF.
2 Press Scan .
SCANNING:OCR
SELECT { } & SET
3 Press or to select SCANNING:OCR and press Set .
The MFC will scan the original, perform OCR in ScanSoft™
TextBridge
® , and then display the result in your word processing
application for viewing and editing.