Brother 8060P MFC-9060 - Manual (Page 61)

51
S E T U P S E N D
Automatic Transmission
This is the easiest way to send a fax.
IMPORTANT: Do not pick up the external telephone’s handset.
1 Insert the document face down in the feeder.
2 Enter the fax number using One Touch Dial, Speed Dial, Search or
the dial pad.
3 Press Start . The machine starts scanning the document and the
display indicates the job number and how much memory is available.
Then the machine will start dialling if it is not sending, receiving or
printing the other documents.
Manual Transmission (with an External
Telephone)
Manual transmission lets you hear the dial tone, ringing and fax
receiving tones before sending a fax.
1 Insert the document face down in the feeder.
2 Pick up the handset of the external telephone and listen for a dial
tone.
3 Enter the fax number using One Touch Dial, Speed Dial, Search or
the dial pad.
4 When you hear the fax tone, press Start .
5 Return the handset to its cradle of the external telephone.
Fax Redial
If you’re sending a fax manually and the line is busy, you can retry the
number by pressing
Redial/Pause .
1 Press Redial/Pause .
2 Press Start .
If you’re sending a fax automatically and the line is busy, the machine
will automatically redial up to 4 times at 2 minute intervals.
Dual Access
You can scan up to 50 messages into the fax memory, even while the
machine is receiving or sending another fax (from the memory). You can
set temporary settings for each fax you’re scanning, except Timer and
Polling.
See
“One Touch
Dialling”
chap. 8
See
“Speed
Dialling”
chap. 8